Prime Guard 1200
FIBER REINFORCED EPOXY WALL SYSTEM
PRIME GUARD 1200 is a nominal 1/16″ 100% solids, Kevlar and fiberglass-reinforced coating system designed for concrete, block, gypsum wall board, and many other standard building materials. It is designed to handle thermal shock and impact and is the choice of specifiers around the world for protecting substrates in the most demanding environments!
Wall and ceiling areas where maximum durability is required and where constant water or wash down procedures are occurring. Specific applications include, but are not limited to: car washes, showers, locker rooms, animal holding and research, laboratories, chemical processing, food and beverage processing areas.
Please use the color chart below as reference for the colors available in this system. For additional or custom system configurations, please contact your Prime Coat Consultant.
Please Note: Online colors may vary depending on individual monitor settings. Contact your Prime Coat Consultant for color accurate swatches.

101 or 130 / 200 or 210 / 280
Cove Bases: N/A
Antimicrobial: Yes
Topcoats: 360 / 520 G / 520 LL
Texture:
Prime Coat offers 3 categories of finish textures.
Texture A is our smoothest finish. Texture B is our mid-level slip resistant finish, and Texture C is our highest level slip resistant finish. Custom textures can be engineered to meet specific design requirements. A mock up is recommended as the best way to ensure customer satisfaction.
