Prime Guard 1201FIBER REINFORCED EPOXY WALL SYSTEM SMOOTH VERSION
PRIME GUARD 1201 is a nominal 1/32″, 100% solids, milled strand fiberglass-reinforced wall coating system designed for concrete, block, gypsum wall board, and many other standard building materials. The milled strands provide reinforcing strength while also providing a smooth easy to clean coating finish.
Wall and ceiling areas where a high level of durability is required and where constant water or wash down procedures are occurring. Specific applications include, but are not limited to: showers, locker rooms, animal holding and research, laboratories, chemical processing, food and beverage processing areas, hallways and corridors, cage wash areas, vivariums, and clean rooms.
Please use the color chart below as reference for the colors available in this system. For additional or custom system configurations, please contact your Prime Coat Consultant.
Please Note: Online colors may vary depending on individual monitor settings. Contact your Prime Coat Consultant for color accurate swatches.
100/ 201 / 339
Cove Bases: N/A
Topcoats: 400 /500 / 509 / 511 / 512
Prime Coat offers 3 categories of finish textures.
Texture A is our smoothest finish. Texture B is our mid-level slip resistant finish, and Texture C is our highest level slip resistant finish. Custom textures can be engineered to meet specific design requirements. A mock up is recommended as the best way to ensure customer satisfaction.