|
|
|
|
|
|
|
| |
We start with a thorough analysis of your unique project or design including a full understanding of project timelines, impact, budget constraints and performance requirements and expectations. Next we gather information from our extensive data network that includes both on-site and lab testing, historical performance and valuable input from our design department.
Once a complete study has been made, a detailed specification and accurate budget will be provided so that you can have confidence that the right system is chosen.
Prime Coat Test Checklist
Prime Coat Testing Equipment List
Sullmair FSC 2000-1346 Floor tester
For measuring the wet and dry coefficients of friction between floor surfaces and a variety of shoe materials.Micrometer
Used for accurate measurement of coating dry-film thicknessElcometer 106 adhesion tester
Tests the adhesion of a coating to the substrate.Tooke Gauge
Performs a direct measurement of total film thickness as well as the thickness of individual coats of paint.Defelsko Positector100-D2
A non-destructive device for measuring coating thickness on wood, concrete and plastic.Calcium Chloride
To measure the quantity of moisture passing over, through and below grade concrete floors.Hydrion pH Pencil
To check the pH of a substrate.Quanix 1500
A non-destructive, combination gauge measuring non-magnetic coatings on steel or iron and insulating coatings on non-metallic substrates.ICRI CSP Visuals
Visual testing against the International Concrete Repair Institute's Concrete Surface Profile standards.Elcometer 123 Surface Profile Gauge
Measures the peaks and valleys of a blasted substrate.Raytek ST2
A temperature gauge that uses infrared technology to deliver immediate and accurate temperature data.Tramex CME
Measures the moisture in concrete using radio wave technology.Dickson TH550 Digital Psychrometer
Measures the relative humidity, ambient temperature and calculates the dew point. |
|
 |
|