Всегда актуальные курсы криптовалют и вся информация из мира биткоин, эфириум и др. на сайте биткоин новости

Clean-Power – PC 720







Free Standard Shipping on all cleaning products!

Call for 55 gal pricing


Product Description

Clean-Power is a powerful liquid floor cleaner and surface degreaser. It is safe to use, clear, odorless, non-flammable and does not contain solvent, ammonia or bleach. Clean-Power’s unique combination of water softeners and extra strength detergents provide a cleaner that can be used at concentrate straight from the container, or diluted up to 32:1 with hot, cold, hard or soft water. Clean-Power can also be used to help neutralize slight PH imbalances in concrete slabs.



Clean-Power is an effective product for cleaning polymer floor and wall coatings, polished or unpolished concrete substrates, various types of brick, marble, Formica, vinyl and porcelain. Clean-Power is ideal for cleaning and removing accumulated dirt and stains, grease, oils, many chemicals, food & beverage spills, mildew and heel marks.


  • 2 year shelf life
  • Odorless
  • Economical
  • Environmentally friendly
  • User friendly / safe
  • Non-irritating
  • Can be diluted
  • Can be hand applied or used in mechanical floor scrubbers



  • 1 gallon jug
  • 5 gallon jug
  • 55 gallon jug


Product Use/Application

Clean Power can be safely applied using mechanical floor scrubbers, pressure washer, used in ‘dip’ tanks, mops, spray bottles or rags.

Surfaces that are heavily soiled, should be treated with full strength Clean-Power and allowed to soak for several minutes before agitating and rinsing. Stubborn stains / grease may require more than one application of Clean-Power to completely remove.

Clean Up

Be sure that all application tools and equipment (including cleaning buckets, mops, scrubbers, etc.) are thoroughly rinsed and cleaned using fresh water.


Empty product containers will contain product residue and must be disposed of properly. Label warnings must be observed at all times. All containers must be disposed in accordance with federal, state, and local regulations.


DO NOT allow Primecoat products to freeze. All Primecoat products should be properly stored above the floor on pallets or shelves, and in an area that has a constant minimum temperature of 500 F (100 C).




Prime Coat is a government contractor under Schedule 56 1949 Swanson Court Gurnee, IL 60031 © 2015 Prime Coat. All Rights Reserved.